SZ-6vibration probe

1. Technical parameters

1)       Sensitivity：50mv/mm/s±5%

2)       Frequency response：10~300HZ

3)       Natural vibration frequency：about 10HZ

4)       Measurement Range：≤2000ｕm（p—p value）

5)       Maximal acceleration：10g

6)       Working environment：temperature-25 — 100℃；relative humidity≤90%

7)       Weight：about  0.25kg

8)       Measurement Direction:  Vertical or horizontal

9)       Installation：Fixed screw hole  M10*1.5，depth 10mm

2. The installation of sensor

n     installation location of the sensor

Install the sensor on the vibrating source horizontally or vertically, then fasten the sensor with a M10 screw

n     the specification of the sensor installation

If the position of the sensor installation is scoured by the high temperature steam, in order to lower the temperature sensor work environment, we should take measures to protect the sensor.

as a general rule, the sensor installation need no protection

3.  The wiring diagram on spot

In connection with the plug and socket of the sensor, in order to make the wiring more reliable, they are marked with 1, 2, 3 or 4 in number, 1 and 2,  3 and 4 respectively shortened.  "1、 2"  works as a sensor output signal positive side, "3 、 4" works as negative side. They are connected to the positive port and the negative port on the back panel of the meter.

聯(lián)系人：王經(jīng)理（銷售經(jīng)理）